订书机常见故障及解决办法 一、订书机常见故障 1. 卡纸：这是订书机最常见的故障之一。当订书机在装订过程中，纸张或其他材料可能会卡在机器内部，导致机器无法正常工作。

2. 订书针弯曲或断裂：使用过程中，订书针可能会因为压力过大或质量不好而弯曲或断裂。

【订书机】晨光订书机10号钉自带起钉办公器1学生用0#小型定书机十号小订书售价：60.00元 领券价：60元 邮费：0.00

3. 弹簧失效：订书机的弹簧是驱动订书针运动的重要部件，如果弹簧失效，那么订书机将无法正常装订。 4. 定位不准确：由于零件磨损或机器老化，可能导致订书机装订位置不准确。 二、解决办法 1. 卡纸问题：首先尝试轻轻打开订书机，将卡住的纸张或其他材料慢慢取出。如果无法取出，可以尝试用细长的工具（如牙签）轻轻拨动，使纸张松动并顺利取出。如果仍然无法解决，可能需要拆开订书机进行清理或修理。 2. 订书针弯曲或断裂：首先检查订书针的质量，确保使用质量好的订书针。如果订书针弯曲或断裂，需要及时更换新的订书针。 3. 弹簧失效：如果发现弹簧失效，建议联系专业维修人员进行检查和更换。非专业人员请勿随意拆卸和修理，以免造成更大的损坏。 4. 定位不准确：如果是因为零件磨损或机器老化导致定位不准确，建议更换相关零件或考虑购买新的订书机。 三、英文翻译 Common Faults and Solutions of Bookbinder

【订书机】可得优订书器省力型手握式订书机专外卖打包用大号钉书机订书机办售价：63.00元 领券价：63元 邮费：0.00

I. Common Faults of Bookbinder 1. Paper jam: This is one of the most common faults of a bookbinder. During the binding process, paper or other materials may get stuck inside the machine, causing it to malfunction. 2. Bent or broken staples: During use, staples may become bent or broken due to excessive pressure or poor quality. 3. Spring failure: The spring of a bookbinder is an important part that drives the movement of staples. If the spring fails, the bookbinder will not work properly for binding. 4. Inaccurate positioning: Due to wear and tear of parts or aging of the machine, the positioning of the bookbinder may become inaccurate. II. Solutions 1. Paper jam issue: First, try to gently open the bookbinder and slowly take out the stuck paper or other materials. If you can't take it out, try to gently move it with a long and thin tool (such as a toothpick) to loosen the paper and take it out smoothly. If the problem still can't be solved, you may need to disassemble the bookbinder for cleaning or repair. 2. Bent or broken staples: First check the quality of staples to ensure using good-quality ones. If the staples are bent or broken, replace them with new ones in time. 3. Spring failure: If the spring fails, it is recommended to contact a professional maintenance personnel to check and replace it. Non-professionals should not disassemble and repair it randomly to avoid causing greater damage. 4. Inaccurate positioning: If it is caused by wear and tear of parts or aging of the machine, it is recommended to replace relevant parts or consider buying a new bookbinder.