订书机如何维护与保养？ 订书机是我们日常办公中经常使用的文具之一，它的正常使用与寿命与我们的维护和保养息息相关。正确的维护和保养不仅可以延长订书机的使用寿命，还可以保证其正常工作，提高工作效率。下面就为大家介绍一下订书机的维护与保养方法。 一、日常使用注意事项 1. 使用合适的订书针：订书针的规格要与订书机相匹配，过粗或过细的订书针都可能对订书机造成损害。 2. 避免过度用力：在使用订书机时，要避免过度用力，以免损坏订书机的内部零件。 3. 保持订书机清洁：使用前和使用后，要用干净的布擦拭订书机，清除灰尘和杂物。 二、定期维护与保养 1. 清洁订书机：定期对订书机进行清洁，可以用螺丝刀或小刷子清除订书机内部的灰尘和杂物。 2. 检查订书机零件：定期检查订书机的各个零件，如弹簧、压板等，看是否有松动或损坏的迹象，如有需要及时更换或维修。 3. 上油润滑：根据订书机的使用情况，适时地给订书机的运动部件上油润滑，以减少磨损，延长使用寿命。 4. 存放干燥处：将订书机存放在干燥的地方，避免潮湿环境对订书机的损害。 三、翻译成英文

How to Maintain and Care for a Bookbinder? The bookbinder is one of the commonly used writing instruments in our daily office work. Its normal use and lifespan are closely related to our maintenance and care. Correct maintenance and care can not only extend the service life of the bookbinder but also ensure its normal operation and improve work efficiency. The following is an introduction to the maintenance and care methods of the bookbinder. I. Daily use precautions 1. Use appropriate bookbinder nails: The specifications of the bookbinder nails should match the bookbinder, and using too thick or too thin nails may damage the bookbinder. 2. Avoid excessive force: When using the bookbinder, avoid excessive force to prevent damage to the internal parts of the bookbinder. 3. Keep the bookbinder clean: Before and after use, wipe the bookbinder with a clean cloth to remove dust and debris. II. Regular maintenance and care 1. Clean the bookbinder: Regularly clean the bookbinder, using a screwdriver or small brush to remove dust and debris from the inside of the bookbinder. 2. Check the bookbinder parts: Regularly check the various parts of the bookbinder, such as springs, pressure plates, etc., to see if there are signs of loosening or damage, and replace or repair them if necessary. 3. Oil lubrication: According to the usage of the bookbinder, oil lubrication should be applied to the moving parts of the bookbinder to reduce wear and extend its service life. 4. Store in a dry place: Store the bookbinder in a dry place to avoid damage caused by a humid environment.