号码机操作注意事项及日常维护保养 一、操作注意事项 1. 操作前准备：在操作号码机前，应先仔细阅读使用手册，了解机器的基本原理和操作流程。同时，确保机器的电源、墨带等耗材准备充足。 2. 正确安装色带和标签纸：安装色带和标签纸时，应按照使用手册的指示进行，确保安装正确，避免因安装不当导致打印效果不佳或机器故障。 3. 正确放置打印纸：在放置打印纸时，要确保打印纸平整，不要有褶皱或重叠，以免影响打印效果。 4. 避免频繁开关机：频繁的开关机会对机器的寿命产生影响，因此在不进行长时间不使用的操作时，应保持机器处于待机状态。 5. 注意保护打印头：打印头是号码机的核心部件，应避免触碰和碰撞，保持清洁，并定期进行保养。 二、日常维护保养 1. 清洁机器：定期对号码机进行清洁，清除机身上的灰尘和污渍，保持机器的清洁度。

2. 更换耗材：定期检查色带、标签纸等耗材的使用情况，及时更换，以保证打印效果。

【打码机】得力标价机型使用油7521号码机打码机油瓶装 2年保质期黑色新品售价：63.86元 领券价：63.86元 邮费：0.00

3. 检查打印头：定期检查打印头的磨损情况，如发现磨损严重，应及时更换。 4. 润滑机械部件：对机械部件进行定期润滑，减少机器的磨损，延长使用寿命。 5. 定期进行整机检查：定期对号码机进行全面检查，包括电气、机械、打印效果等方面，及时发现并处理问题。 Maintenance and Operation Notes for Numbering Machines I. Operation Notes 1. Preparation before operation: Before operating the numbering machine, carefully read the instruction manual to understand the basic principles and operating procedures of the machine. Ensure that the power supply, ink ribbons, and other consumables are fully prepared. 2. Correct installation of ribbons and label paper: When installing ribbons and label paper, follow the instructions in the instruction manual to ensure proper installation and avoid poor printing or machine malfunctions caused by improper installation.

3. Correct placement of printing paper: When placing printing paper, ensure that it is flat without folds or overlaps to avoid affecting the printing result.

【打码机】得力标价机号码机使用油7521型黑色油瓶装 2年保质期打码机新品售价：63.90元 领券价：63.9元 邮费：0.00

4. Avoid frequent on and off: Frequent on and off operations will affect the life of the machine. Therefore, when not in use for a long time, keep the machine in standby mode. 5. Protect the print head: The print head is the core component of the numbering machine, so avoid touching and collision, keep it clean, and perform regular maintenance. II. Daily Maintenance and Care 1. Clean the machine: Regularly clean the numbering machine to remove dust and dirt on the body and keep the machine clean. 2. Replace consumables: Regularly check the usage of ribbons, label paper, and other consumables, and replace them in time to ensure good printing results. 3. Check the print head: Regularly check the wear of the print head. If it is severely worn, replace it in time. 4. Lubricate mechanical parts: Regularly lubricate mechanical parts to reduce wear and extend the service life of the machine. 5. Regularly perform a comprehensive inspection: Regularly inspect the numbering machine, including electrical, mechanical, printing results, and other aspects to discover and address problems in time.