**号码机使用注意事项及故障排除** 一、号码机使用注意事项 1. 操作前准备： - 在使用号码机之前，请确保已仔细阅读产品说明书并了解各功能键的作用。 - 检查电源线是否完好无损，并确保设备接地良好。 - 准备充足的打印纸或碳带（若为热敏打印机），并确保打印质量良好。 2. 正确操作： - 操作时请保持机器稳定，避免摇晃或移动，以防影响打印效果。 - 避免在机器工作时强行打开上盖或触摸打印头，以免造成损坏。 - 定期清洁打印头和打印区域，以保持打印质量。 3. 维护保养： - 定期检查打印纸或碳带是否需要更换。 - 定期检查设备内部是否有积尘或杂物，如有应及时清理。 - 定期对设备进行维护和保养，以延长其使用寿命。

二、号码机故障排除

【财务证明用品】铜质可调日期章生产时迷你打码机日期间印年月日号码机数字新款售价：57.66元 领券价：57.66元 邮费：0.00

1. 打印不清晰： - 检查打印纸或碳带是否使用正确，是否需要更换。 - 清洁打印头，确保打印质量。 - 检查设备设置，确保打印浓度设置在合适范围内。 2. 卡纸或卡带： - 检查进纸口或进带口是否有杂物或灰尘，如有应立即清理。 - 检查纸张或碳带是否符合规格要求，如有问题应更换为合格产品。 - 检查设备内部是否有故障，如有必要请联系专业人员进行维修。 3. 设备无法启动： - 检查电源线是否插好，电源是否正常。 - 检查设备是否接通电源开关，未接通需接通电源。 - 若问题依旧存在，请联系厂家或售后服务中心寻求帮助。 三、翻译成英文如下： **Numbering Machine Usage Precautions and Troubleshooting** I. Numbering Machine Usage Precautions 1. Preparation before Operation: - Before using the numbering machine, ensure you have carefully read the product manual and understand the function of each key. - Check if the power cord is intact and if the equipment is properly grounded. - Prepare sufficient printing paper or carbon ribbon (for thermal printers) and ensure good printing quality. 2. Correct Operation: - Keep the machine stable during operation to avoid shaking or movement that may affect the printing result. - Avoid forcing open the top cover or touching the print head during operation to prevent damage. - Regularly clean the print head and printing area to maintain printing quality.

【打码机】得力打码机日期打码器打编码机自动上墨多位号码机自动编号印页码售价：65.68元 领券价：65.68元 邮费：0.00

II. Troubleshooting for Numbering Machines

【打码机】自动号码机专用油墨打码机印油生产日期打码器打价机价格标签机黑售价：68.68元 领券价：68.68元 邮费：0.00

1. Printing is not clear: - Check if the printing paper or carbon ribbon is used correctly and if it needs to be replaced. - Clean the print head to ensure good printing quality. - Check the equipment settings to ensure the print concentration is set within an appropriate range. 2. Paper or tape jamming: - Check if there are any foreign objects or dust in the paper or tape input port, and clean it immediately if found. - Check if the paper or carbon ribbon meets specification requirements, and replace it with a qualified product if there is a problem. - If there is a problem with the equipment, contact a professional for repair if necessary. 3. Equipment cannot be started: - Check if the power cord is properly plugged in and if the power supply is normal. - Check if the equipment is turned on at the power switch, and if not, turn it on. - If the problem persists, contact the manufacturer or after-sales service center for help.