**快速解决：订书机常见故障修理法** 一、常见故障与解决方法 订书机作为我们日常工作中常见的办公设备，时常因为各种原因出现一些小故障。这里我们将向您介绍订书机常见的一些故障以及相应的修理方法。 1. 订书机卡纸 问题描述：订书机在装订过程中卡住纸张。 解决方法：首先，请关闭订书机电源（如有）并小心地将卡住的纸张从机器中轻轻取出。清理掉可能阻碍转轮和齿牙的纸屑或杂质，确保后续的纸张装订顺畅。 2. 订书钉弯曲 问题描述：订书钉在装订过程中弯曲或变形。

解决方法：检查订书钉是否为正品，同时检查订书机的加热部分是否过热导致订书钉受热变形。如为后者，请确保机器冷却后再使用。

【订书机】订书机学生用迷你小号手握式订便携式装书器订机省力儿童钉书机售价：54.68元 领券价：54.68元 邮费：0.00

3. 订书机不工作 问题描述：按下装订键后，订书机无任何反应。 解决方法：检查电源是否连接正常（如为充电式则确保电量充足），检查开关是否完好无损。如为机械式订书机，则检查是否有足够的动力（如弹簧）来驱动装订过程。 二、英文翻译 Quick Solutions for Common Stapler Malfunctions Repair Common malfunctions and solutions for staplers: 1. Stapler Paper Jam Problem Description: The stapler gets stuck when stapling. Solution: First, turn off the stapler (if there is power) and carefully remove the jammed paper from the machine. Clean any paper dust or debris that may hinder the rotation of the wheels and teeth to ensure smooth paper stapling in the future.

2. Bent Staples

【订书机】得力订书机大号订厚书装订机外打包用学生卖订书机订书器家用新品售价：55.32元 领券价：55.32元 邮费：0.00

Problem Description: The staples are bent or deformed during the stapling process. Solution: Check if the staples are genuine products, and inspect if the heating part of the stapler is too hot, causing the staples to deform due to heat. If it's the latter, make sure the machine is cooled down before use. 3. Stapler Not Working Problem Description: The stapler does not respond when the stapling button is pressed. Solution: Check if the power is connected properly (or if it's a rechargeable stapler, ensure sufficient battery life), and if the switch is intact. For mechanical staplers, check if there is enough power (such as a spring) to drive the stapling process.