订书机常见故障与解决方法 一、订书机常见故障 1. 卡纸 这是订书机最常见的故障之一。当订书机在将纸张订合时，如果纸张大小、厚度不匹配或者纸张有褶皱，就可能导致卡纸。 2. 订书钉堵塞 当订书机长时间使用或者订书钉质量不佳时，可能出现订书钉堵塞的情况，这会导致订书机无法正常工作。 3. 弹簧失效 弹簧是订书机的一个重要部件，如果弹簧失效，可能会导致订书机无法正常推钉或者无法正常闭合。 二、订书机故障解决方法

1. 卡纸解决方法 首先尝试将订书机中的纸张轻轻拉出，如果无法拉出，可以尝试拆开订书机，找到卡纸的位置并小心取出。如果经常出现卡纸现象，建议检查纸张的大小、厚度是否匹配，或者纸张是否有褶皱。 2. 订书钉堵塞解决方法 当发现订书钉堵塞时，应立即停机并清理堵塞的订书钉。可以尝试用细长的工具（如细棍或牙签）将堵塞的订书钉轻轻拨出。同时，应确保使用质量良好的订书钉，避免再次出现堵塞现象。 3. 弹簧失效解决方法 如果发现弹簧失效，应立即停机并寻求专业人士的帮助进行维修。不建议非专业人士自行拆卸和修理订书机，以避免造成更大的损坏。 Solutions to Common Problems of a Bookbinder

I. Common Bookbinder Issues 1. Paper Jamming This is one of the most common issues with a bookbinder. When the bookbinder is trying to bind the paper, if the paper size, thickness is not suitable or if the paper has creases, it can cause paper jamming. 2. Staple Jamming

When a bookbinder is used for a long time or if the quality of the staples is not good, it may cause staple jamming, which can prevent the bookbinder from working normally.

3. Spring Failure The spring is an important part of the bookbinder. If the spring fails, it may cause problems such as inability to push the staple or inability to close properly. II. Solutions to Bookbinder Issues 1. Solutions to Paper Jamming First, try to gently pull out the paper in the bookbinder. If it cannot be pulled out, try to disassemble the bookbinder, find the location of the jammed paper and carefully remove it. If paper jamming occurs frequently, it is recommended to check if the paper size and thickness are suitable or if there are creases in the paper. 2. Solutions to Staple Jamming When staple jamming is detected, immediately stop using the bookbinder and clear out the jammed staples. Try using a long and thin tool (such as a thin stick or toothpick) to gently pull out the jammed staples. At the same time, ensure that good quality staples are used to avoid this issue recurring. 3. Solutions to Spring Failure If spring failure is detected, immediately stop using the bookbinder and seek help from a professional for repair. It is not recommended for non-professionals to disassemble and repair the bookbinder themselves to avoid further damage.