如何正确选择和使用印泥 一、正确选择印泥 选择印泥时，首先要考虑印章的材质和大小。不同的印章材质需要不同类型的印泥，如金属、玉石、牛角等材质的印章，应选择具有较好渗透性和附着力强的印泥。而较小的印章则需要更为细腻的印泥，以避免印章边缘模糊不清。 其次，要根据使用场合和需求选择合适的印泥颜色。正式场合通常使用红色或深色系的印泥，而一些非正式场合或特殊需求则可能需要其他颜色的印泥。 最后，要选择质量可靠的印泥品牌和产品。优质的印泥不仅颜色鲜艳、干湿适中，而且具有较好的耐久性和防褪色性。 二、正确使用印泥 1. 准备阶段：在使用前，要确保印章和印泥的清洁度。用软布擦拭印章表面，去除油污和灰尘；将印泥轻轻摇晃，使其均匀混合。 2. 蘸取印泥：用印章的侧面或边缘轻轻蘸取适量印泥，注意不要过多或过少。过多的印泥容易导致印章边缘模糊，过少的印泥则无法充分展现印章的细节。 3. 盖章：在盖章时，要保持适当的力度和角度。力度过大容易导致印章变形或模糊，而角度不正确则可能无法完全展现印章的形状。可以先在废纸上试盖几次，以掌握合适的力度和角度。

4. 维护与保养：使用后要及时清理印章和印泥，避免长时间放置导致干结。定期检查印泥的干湿程度，及时添加适量的油料。同时，避免将印泥暴露在阳光直射或高温环境中，以免影响其性能和使用寿命。

The Correct Way to Choose and Use Ink Pad Firstly, when choosing an ink pad, it is essential to consider the material and size of the seal. Different seal materials require different types of ink pads. For example, ink pads with good permeability and strong adhesion should be chosen for metal, jade, or cowhorn seals. Smaller seals require more delicate ink pads to avoid blurry edges. Secondly, choose the appropriate ink pad color based on the occasion and need. For formal occasions, red or dark-colored ink pads are usually used, while other colors may be needed for informal occasions or special needs. Lastly, choose a reliable brand and product of ink pad with good quality. High-quality ink pads are not only bright in color and moderately wet, but also have good durability and fade resistance. II. Correct Use of Ink Pad 1. Preparation stage: Before use, ensure the cleanliness of the seal and ink pad. Wipe the seal surface with a soft cloth to remove oil and dust, and gently shake the ink pad to mix it evenly. 2. Apply ink: Use the side or edge of the seal to gently apply an appropriate amount of ink, taking care not to apply too much or too little. Excessive ink may cause blurry edges of the seal, while insufficient ink may not fully show the details of the seal. 3. Stamping: When stamping, maintain appropriate force and angle. Excessive force may cause the seal to deform or become blurry, while an incorrect angle may prevent the full display of the seal's shape. You can try stamping on scrap paper a few times to find the right force and angle. 4. Maintenance and care: After use, clean the seal and ink pad promptly to avoid long-term placement resulting in drying and cracking. Regularly check the moisture content of the ink pad and add an appropriate amount of oil if necessary. Also, avoid exposing the ink pad to direct sunlight or high temperatures to prevent affecting its performance and service life.