印泥的保养与维护：让你的印章持久如新 印章的使用在现代社会已经十分常见，印泥则是使用印章的必备工具之一。但是，由于日常使用的不当或缺乏维护，许多印章在一段时间后可能会出现模糊、脱色等现象，严重影响其使用效果。为了使你的印章持久如新，正确的保养和维护是必不可少的。 一、印泥的保养 1. 保持干燥：印泥在使用后应及时存放在干燥的环境中，避免潮湿和受潮。潮湿的印泥容易发霉、变质，影响使用效果。 2. 避免阳光直射：印泥应存放在阴凉处，避免阳光直射。长时间的阳光照射会使印泥变质、干裂。 3. 定期搅拌：长时间不使用的印泥容易分层，因此应定期搅拌，使各部分成分均匀混合。 4. 清洁印台：每次使用印章前，应先清洁印台，去除上一次使用后的残留物，以免影响印章的清晰度。

二、印章的维护 1. 定期清洗：印章在使用一段时间后，会因为墨水、灰尘等物质的附着而变得模糊不清。此时，应将印章用清水清洗干净，去除污渍和残留物。 2. 及时加油：当印章的油墨不足时，应及时加油。加油时应注意不要过多或过少，以免影响印章的使用效果。 3. 避免硬物刮擦：印章表面应避免与硬物接触和摩擦，以免划伤表面，影响清晰度。 4. 储存注意事项：不使用时，将印章存放在干燥、通风、避光的地方，避免受潮和阳光直射。 三、翻译成英文 Maintenance of Ink Pad: Keep Your Seal as Good as New The use of seals is very common in modern society, and ink pad is one of the essential tools for using seals. However, due to improper daily use or lack of maintenance, many seals may become blurry or fade after a period of time, seriously affecting their use effect. In order to keep your seal as good as new, correct maintenance and care are essential. First, the maintenance of ink pad: 1. Keep it dry: The ink pad should be stored in a dry environment after use to avoid moisture and dampness. Moist ink pads are prone to mildew and deterioration, which affects the use effect. 2. Avoid direct sunlight: The ink pad should be stored in a cool place and avoid direct sunlight. Long-term exposure to sunlight can cause the ink pad to deteriorate and crack. 3. Regular stirring: Ink pads that are not used for a long time are prone to stratification, so they should be stirred regularly to evenly mix the components. 4. Clean the seal pad: Before each use of the seal, clean the seal pad to remove the residue left after the previous use, so as to avoid affecting the clarity of the seal. Second, the maintenance of seal: 1. Regular cleaning: After a period of use, the seal may become blurry due to the attachment of ink, dust and other substances. At this time, the seal should be cleaned with water to remove stains and residues. 2. Timely refueling: When the ink of the seal is insufficient, it should be refueled in time. When refueling, pay attention not to add too much or too little ink to avoid affecting the use effect of the seal. 3. Avoid hard objects scratches: The surface of the seal should be avoided from contact and friction with hard objects to avoid scratching the surface and affecting its clarity. 4. Storage precautions: When not in use, store the seal in a dry, ventilated and dark place to avoid dampness and direct sunlight.