**号码机操作教程及维护保养方法** **一、号码机操作教程** **1. 开机与关机** * 开机：请确保电源线已正确连接至电源插座，然后按下电源开关，等待机器启动完成。 * 关机：先关闭正在进行的打印任务，然后长按电源键直至屏幕熄灭。 **2. 打印操作** * 装纸：打开机器上盖，将打印纸装入纸盒，注意纸张方向。 * 设置号码：通过操作面板或连接电脑设置需要打印的号码。 * 开始打印：确认设置无误后，按下开始键进行打印。 **3. 连接电脑** * 通过USB线将号码机与电脑连接。 * 在电脑上安装相应的驱动程序，并打开控制软件。 * 在软件中设置好相关参数后，即可通过电脑控制号码机进行打印。 **4. 常见问题处理** * 纸张卡住：请小心取出卡住的纸张，检查纸盒是否正确安装。 * 打印不清晰：可能是墨带耗尽或安装不当，请及时更换墨带并确保安装正确。 **二、号码机维护保养方法** **1. 日常清洁** * 定期用干布擦拭机器表面，保持清洁无尘。 * 避免使用化学清洁剂，以免损坏机器表面涂层。 **2. 定期检查与维护** * 定期检查打印纸和墨带的使用情况，及时更换。 * 检查机器各部件是否松动或损坏，如有异常及时联系维修。

**3. 存放环境**

【打码机】晨光号码机油墨手动打码机自动专用快印码机干印油标价机墨水打号售价：61.68元 领券价：61.68元 邮费：0.00

* 将号码机存放在干燥、通风的地方，避免潮湿和高温环境。 * 避免阳光直射和强烈震动，以免影响机器性能和寿命。 **三、英文翻译** Number Machine Operation and Maintenance Guide **I. Number Machine Operation Guide** **1. Power On and Off** * Power On: Ensure the power cord is correctly connected to the power socket, then press the power switch and wait for the machine to start up. * Power Off: First, close the printing task, then press and hold the power button until the screen turns off. **2. Printing Operation** * Paper Loading: Open the top cover of the machine, load the printing paper into the paper tray, and pay attention to the paper direction. * Number Setting: Set the numbers to be printed through the operation panel or by connecting to a computer. * Start Printing: After confirming that the settings are correct, press the start button to begin printing. **3. Connecting to a Computer** * Connect the number machine to a computer via a USB cable. * Install the corresponding driver on the computer and open the control software. * After setting the relevant parameters in the software, you can control the number machine to print through the computer. **4. Handling Common Issues** * Paper Jam: Carefully remove the jammed paper and check if the paper tray is installed correctly. * Blurred Printing: This may be due to a depleted or improperly installed ink ribbon. Please replace it promptly and ensure correct installation. **II. Number Machine Maintenance Methods** **1. Daily Cleaning** * Regularly wipe the machine surface with a dry cloth to keep it clean and dust-free. * Avoid using chemical cleaners that may damage the machine's surface coating. **2. Regular Checks and Maintenance**

* Regularly check the usage of printing paper and ink ribbons, and replace them promptly when necessary.

【打码机】自动号码机专用油墨打码机印油生产打码日期器打价机价格标签机黑售价：69.68元 领券价：69.68元 邮费：0.00

* Check if any parts of the machine are loose or damaged, and contact maintenance personnel promptly if there are abnormalities. **3. Storage Environment** * Store the number machine in a dry and well-ventilated place, avoiding damp and high-temperature environments. * Avoid direct sunlight and strong vibrations to prevent affecting machine performance and lifespan.