号码机常见故障排除与维护保养 一、常见故障排除 1. 无法正常打印 故障原因：可能是墨带用完或墨带损坏，或者打印头脏污。 排除方法：检查墨带是否用完或损坏，如有则更换新的墨带。如无，用酒精清洁打印头。 2. 打印不清晰 故障原因：可能是打印头过热或打印压力不足。 排除方法：暂停使用，待打印头冷却后再进行打印。或者调整打印压力至合适状态。 3. 机器无法启动 故障原因：可能是电源线松动或电源开关损坏。 排除方法：检查电源线是否牢固连接，或者更换新的电源开关。 二、维护保养 1. 定期清洁

定期使用酒精或专用清洁剂清洁打印头和内部部件，以保持机器的良好运行状态。 2. 更换耗材 当墨带或色带用尽时，应及时更换新的耗材，以保证打印质量。 3. 防潮防尘 将号码机存放在干燥、无尘的环境中，以防止机器受潮和积尘。 4. 定期检查 定期对机器进行全面检查，包括检查电源线、打印头等部件的磨损情况，及时发现并处理问题。 三、英文翻译 Common Troubleshooting and Maintenance of Numbering Machines

I. Common Troubleshooting

1. Unable to Print Normally Cause: The ink ribbon may be used up or damaged, or the printing head may be dirty. Solution: Check if the ink ribbon is used up or damaged, and replace it if necessary. If not, clean the printing head with alcohol. 2. Printing is Not Clear Cause: The printing head may be too hot or the printing pressure is not enough. Solution: Pause the use and continue printing after the printing head cools down. Or adjust the printing pressure to an appropriate level. 3. The Machine Cannot Start Cause: The power cord may be loose or the power switch may be damaged. Solution: Check if the power cord is securely connected or replace the new power switch. II. Maintenance and Care

1. Regular Cleaning Clean the printing head and internal components regularly with alcohol or special cleaning agents to maintain the good running condition of the machine. 2. Replacing Consumables Replace new consumables in time when the ink ribbon or ribbons are used up to ensure printing quality. 3. Protection from Moisture and Dusts Store the numbering machine in a dry and dust-free environment to prevent the machine from getting damp and dusty. 4. Regular Check-up Conduct a comprehensive check on the machine regularly, including checking the wear of power cords, printing heads and other components, and finding and dealing with problems in time.